AIMS Power 6000 Watt Pure Sine Inverter Charger - 24VDC to 120/240VAC Split Phase - LISTED TO UL & CSA
$2,115.00$2,313.00Save $198.00

AIMS Power 6000 Watt Pure Sine Low Frequency Inverter, split phase with built-in battery charger and transfer switch is perfect for large-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid, business back up power, mobile and emergency backup power applications anywhere that uses 100/110/120/220/230/240 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.
This AIMS power inverter charger includes a powerful 80 amp charger and is capable of accepting any source of 230/2400v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home.
The 6000 watt inverter charger is capable of a 18000 watt surge for 20 seconds and can run at 6000 watts continuously. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 20 volts or 21 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power.
The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.
Video
Features
Features:
- 6000 watt low frequency inverter
- 18000 watt surge for 20 seconds 300% surge capability
- 24 Volt DC
- Split phase 120/240Vac output
- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
- Battery priority selector
- Terminal block
- Marine coated and protected
- Multi stage smart charger 80 Amp charges GEL, Lead, AGM, Lithium
- Remote panel available LED or LCD
- Auto frequency
- 10msec typical transfer time
- Selectable 25W power save mode (hibernation)
- 7 battery type settings for charger
- Allows start up and through power with depleted batteries
Specifications
Output Specifications:
- Continuous Output Power: 6000 Watts
- Surge Rating: 18000 Watts (20 Seconds)
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- Output Voltage: 100-110-120-220-230-240Vac
- Output breaker: 40 Amps
- Nominal Efficiency: >88% (Peak)
- Line Mode Efficiency: >95%
- Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 10% DC
- Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)
Input Specifications:
- Nominal Input Voltage: 24.0Vdc
- Minimum Start Voltage: 20.0Vdc
- Low Battery Alarm: 21.0Vdc-22.0Vdc
- Low Battery Trip: 20.0Vdc-21.0Vdc
- High Voltage Alarm: 32.0Vdc
- Low Battery Voltage Restart: 26.6Vdc
- Idle Consumption: 52.5 watts
- Power Saver Mode Idle Consumption: <25 watts
Charger Specifications:
- Output Voltage: Depends on battery Type
- Charger Rate: 80A
- Over charge protection shutdown: 31.4V
- Selectable charge setting based on battery type
- Adjustable charge current: off-15%-100%
- Four stage smart charger
Transfer Switch Specifications
- 80 am automatic transfer switch
- 10 ms (max)
Dimensions:
- Unit Weight: 108 lbs.
- Unit Size L x W x H: 19 x 16.5 x 8 inches
- Shipping Weight: 113 lbs.
- Shipping L x W x H: 30.5 X 14.25 X 13.75 inches
- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
- 2 Year Warranty
Manual
- 100% Secure payment with SSL Encryption.
- If you're not 100% satisfied, let us know and we'll make it right.
- Orders ship within 5 to 10 business days.
- Tip: Buying 2 products or more at the same time will save you quite a lot on shipping fees.